Air Live WH-9200AP User Manual

WH-9200AP Dual Band Connection Guide For AP vs. Client Mode

WH-9200AP Connection Guide 7 (If you want to use the other encryptions by yourself, you must use the same as WH-5420CPE’s encryptions.

WH-9200AP Connection Guide 83. WH-5420CPE Settings Step 1. Login the device and change to the Client Mode. 1. In PC3, type “WH-5420CPE’s IP address”

WH-9200AP Connection Guide 92. You can see the SSID with WH-9200AP’s Radio2, then select it○2Æ Press “Connect” button○3. (In our sample the SSID i

WH-9200AP Connection Guide 10Step 3. Check the connection. After configured successfully, you can ping the PC1’s IP from PC3 to check if the connecti

WH-9200AP Connection Guide 11 1 234

WH-9200AP Connection Guide 124. In our sample, we change the device’s IP to 192.168.1.2○5 Æ press “Apply”○6 Æ “OK”.○7 5. Access th

WH-9200AP Connection Guide 136. Press the “Setup” button of Client Infrastructure mode to into the set up page.○10 Step 2. Connect

WH-9200AP Connection Guide 14 3. Then it will show the site survey result of the “Site Survey” dialog window. You can see th

WH-9200AP Connection Guide 15 4. Then it shows the “Security Settings” dialog box. In our sample, we use these parameters: Security: WPA2-PSK○6 Key

Copyright & Disclaimer The information in this guide is for your reference only. OvisLink Corp. does not guarantee the accuracy of its content

Table of Contents Overview...1

WH-9200AP Connection Guide 1 Overview This document guides we use WH-9200AP to connect two wireless networks simultaneously that radio1 is 802.11b/g

WH-9200AP Connection Guide 2 Configuration 1. Topology: In this sample, we are going to introduce you to connect WH-5420CPE and AirMax5 with the “du

WH-9200AP Connection Guide 32. WH-9200AP Settings Step 1. Login the device and enter the Dual AP Mode. 1. In PC1, type “WH-9200AP’s IP address” into

WH-9200AP Connection Guide 4 3. Press the “Setup” button of Dual AP mode to into the set up page.○5 Step 2. Encryption and conn

WH-9200AP Connection Guide 52 34 3. In our sample, we use these parameters: Security: WPA2-PSK○2 Key string: 12345678○3 Type: Both (TKIP/AES Mix)

WH-9200AP Connection Guide 64. Press the “Setup” button of Advanced Settings to show the “Advanced Wireless Settings” dialog box○5, then press “ACK