Air Live POE-200CAM User Manual

AirLive POE-200CAM User’s Manual iPOE-200CAM 1/3 Sharp CCD Dual Stream DOM IP Camera User’s Manual

6. If the IP is not in your IP segment, select the founded IP Camera and click “Setup” Note that the text color of the listed IP Camera is red if i

8. At the end of the setup instruction, the IP Camera Reboots 9. Click the Search button to search again 10. Click “Link to IE” to proceed. 11. The

field of your browser. Note： • If you only want to view the video without setting page, enter “http://<IP>/index2.htm” as your web URL. 2. U

3.3 Configuration of Main Menu 3.3.1 Setting This function is only for the Administrator. Click this button to get into the Basic and Advance sett

Video Buffer: Turn the Video Buffer function On/Off. The Video Buffer function makes the streaming more smooth in unsteady network environment, but mi

Audio buttons： ：Speakers turned on. ：Speakers turned off. ：Microphone turned on. ：Microphone turned off. ： Volume control ba

Chapter 4: Setting 4.1 Basic Click the “Basic” folder to display the sub folders, including System, Camera, Network, and Security. 4.1.1 System Inf

Day & Time Current date & time：This displays the current date and time of the device. PC clock：This displays the date and time of the monit

Initialize Reboot：Click this button to reboot the device. A confirmation dialogue will appear. Click OK to proceed. It takes about two minutes to re

4.1.2 Camera General RTSP: Switch the RTSP streaming On/Off. Note： • RTSP: Real Time Streaming Protocol. RTSP is supported by most of the media c

ClauseDescription EN 55022:2006 Class B Limits and methods of measurement of radio disturbance characteristics of information technology equipmen EN

MPEG4 Computer View RTSP (If RTSP mode is ON) RTSP port: Specify the transmission port number of RTSP streaming video. Default value is 554. Viewe

MPEG4 viewer port (If RTSP mode is OFF) Unicast streaming Video/Audio port number : Specify the transmission port number of the video data. It is ini

Mobile View RTSP (If RTSP mode is ON) RTSP port: Specify the transmission port number of RTSP streaming video. Default value is 8554. RTP (If RTS

Fixed Bitrate：Set the bit rate of MPEG4 image transmission for a line. Selectable values are 64, 32, and 16kbps.. AirLive POE-200CAM User’s Manual

MJPEG Note： • MJPEG settings are unavailable if the RTSP mode is ON, which means the MJPEG streaming is closed. MJPEG viewer port Unicast streamin

4.1.3 Network Information MAC address：Display the MAC address of the device. Obtain an IP address automatically (DHCP)：If a DHCP server is installed

the Setup Program, access the device by typing the IP address of the device on the web browser as follows: Example: when HTTP port number is set to 2

Server name：Choose the DDNS Server from the list. User ID：Enter the user ID for authentication necessary for DDNS connections. Type it up to 64 chara

HTTP port：Enter the HTTP port number and default HTTP port is 80. SSL port: Enter the SSL port number and default SSL port is 443. MPEG4 viewer por

IP Notification When network notify type is set to On, you can send an e-mail notification of the completion of the network setting. Notify type：Sel

AirLive POE-200CAM CE Declaration Statement Country Declaration Country Declaration cs Česky [Czech] OvisLink Corp. tímto prohlašuje, že tento AirLi

for reply mail and sending system messages from the SMTP server. Subject：Type the subject/title of the e-Mail up to 64 characters. With respect to mai

4.1.4 Security Account The device default account and password setting is “admin/airlive”. That means everyone might access the device including the c

To use the HTTPS encryption, please set up “Create self-signed certificate” for the first time you use the HTTPS function, then set up the connectio

4.2 Advance 4.2.1 FTP Client Use this menu to set up for capturing and sending images to an FTP server. By using FTP client function, you can send the

Select On to connect to FTP server using the passive mode. Attached file type：Set attached file type to MJPEG or MPEG.4 Alarm sending Set to forward t

Buffer — Alarm buffer setting Menu on page. Effective period：Set the period when the periodical sending is effective. Always：The periodical sending

Effective period：Set the period when the periodical sending is effective. Always：The periodical sending is always effective. Schedule：You can specif

• During transmission of an image file via mail, the frame rate and operation performance of the monitor image of the main viewer decline. • While the

4.2.2.2 Alarm sending Set to send the mail with connection to the alarm detection by the external sensor input or by the built-in motion detection fun

Buffer — Alarm buffer setting Menu on page. 4.2.2.3 Periodical sending You can set to send an image file by SMTP server periodically by selecting On t

Before you use this Product This AirLive product has been designed with safety in mind. However, if not used properly electrical products can cause f

4.2.3 HTTP Event Use this menu to set up for capturing and sending images to an HTTP server. By using HTTP client function, you can send the image and

4.2.3.2 Alarm sending Set to send the mail with connection to the alarm detection by the external sensor input or by the built-in motion detection fun

4.2.4 Schedule When you click Schedule on the Advanced mode menu, the Schedule setting menu appears. This is the same menu as the setting menu which i

4.2.5 Alarm Buffer You can set the Pre-alarm image and audio (the image and audio before the alarm detection) and the Post - alarm image and audio. T

4.2.6 Motion Detection When you click Motion Detection on the Advance mode menu, the Motion Detection setting menu appears. There are three Motion Det

Carry out the following steps： 1. Click On to Motion Detection 1 choose one of eight orders. 2. A detecting zone 1 appears and use mouse to adjust a

4.2.7 System Log The System Log function allows users to review any changes and events happened. The system starts logging automatically after started

Appendix A – Frame Rate & Bit Rate Table This chapter provides tables that help you to optimize your IP camera with your network environment. Base

A.1.3. MJPEG @ 15fps / kbps Quality 704*480 352*240 176*120 Excellent 7500 2800 1000 Detailed 5000 1500 700 Good 3500 1000 500 Standard 2000 800 40

A.2. PAL CCD IPCamera A.2.1. MPEG4 @ 25fps / kbps Quality 704*576 352*288 176*144 Excellent 1800 400 100 Detailed 600 150 50 Good 400 100 40 Standa

Table of Contents Chapter 1: Installation ... 1 1.1 Installation Steps ...

A.2.3. MJPEG @ 15fps / kbps Quality 704*576 352*288 176*144 Excellent 7800 1700 650 Detailed 4300 1000 450 Good 2500 650 350 Standard 1300 450 25

Appendix B – Storage Requirement Table This chapter provides tables that helps you set your recording storage system. Please refer to the following ta

176*120 1024 15 9.5 176*120 512 30 5.6 176*120 512 15 5.8 176*120 128 30 1.6 176*120 128 15 1.6 B.4 MJPEG Storage Requirement GB / channel / day

Chapter 1: Installation 1.1 Installation Steps Follow these steps to install the AirLive POE-200CAM on your Ethernet: 1. Check the package contents a

Chapter 2: Using IP Camera via Mobile Phone To use IP cameras via mobile phones, please make sure your RTSP is set to “ON”. (Default is “ON”) To cha

Chapter 3: Using IP Camera via Web Browser System Requirement To use the product normally, we strongly recommend your computer follows our minimum sy

3.1 Camera Installation 1. Insert CD into your PC/Laptop. 2. Auto Run Screen then shows up, click “setup wizard” to install the configuration tool s